Looking for:
Acronis true image 2017 delete backup free download
I purchased Acronis True Image , Build The topic of Section 4. In the Backup Section, the only information displayed at the top of the screen are the date and time of the last backup and the date of the next scheduled backup.
How can one delete old backups? Thank you for your help. The option to delete a backup in the GUI is found via the drop-down menu associated with each backup task you have configured as shown in the image below:. The important factor to understand is that this Delete option will delete both the task and its settings as well as all the files created by the task.
To delete obsolete backup versions automatically, you can set one of the following cleanup rules:. Note: Please do not expect any instant reply for private messages as I am often unable to access these due to forum timeout errors! Dear Mr Smith,. Thank you for your detailed and prompt response. Your response confirms that one indeed cannot delete old backups by following the Manual instructions, as quoted in my question, because no list of backups is displayed.
I tried to delete old backups in the GUI because the manual stated in Section 4. Acronis has an internal database that writes information about created backup. When manually deleted in Explorer, there is no update to the database so it expects that they still exist in those locations. The way to “fix” this is to run a validation of the backup in Acronis and when it says that files are missing and wants you to locate them or ignore them, click on IGNORE and they will be purged from the database.
The downside is you have to do this for each. Once it’s done, then it will be in sync again. Just make sure that you don’t delete critical versions if you plan on keeping some of them. For instance if you have the original full and 20 incrementals, if you delete incremental 1, then are useless now too. The “scheme” is the type of backup you chose full, incremental, differential, etc and includes the of backups in the chain and automated cleanup rules. MVP LogViewer MVP Google Drive Cleanup Utility Cloning Correctly Clone vs Backup Community Tools Contact Support Product Documentation Common OEM Drivers.
A backup task is created using the ‘Add backup’ option where you give this a name, i. My Disks, then configure what Source data will be included, where the backup will be stored, what type of backup scheme will be used, what schedule used etc. Yes, if you delete backup files using Windows Explorer, you leave behind information which Acronis has stored in an internal database about those files and the task that created them. When you next run that backup task, you will be shown popup error messages for each deleted file.
You can choose to delete files in this way, but you should then use the task option to Validate the backup afterwards, then when the error messages are shown, take the Ignore option if shown, or else the Cancel option and repeat this for each message until the validation is complete. Acronis have introduced a better way of managing these backups in ATI by providing a ‘Cleanup versions’ tool in the drop-down menu for each task.
Thank you very much for your detailed and very useful responses. Authored on. Order Asc Desc. Date within – Any – 1 day 3 days 1 week 2 weeks 1 month 2 months 6 months 1 year. Deleting old backups. Thread needs solution. Posts: 1. Comments: 2. Products: Acronis True Image Steve Smith. Posts: Comments: GH, welcome to these public User Forums.
The option to delete a backup in the GUI is found via the drop-down menu associated with each backup task you have configured as shown in the image below: The important factor to understand is that this Delete option will delete both the task and its settings as well as all the files created by the task.
See the ATI User Guide information below on Automatic Cleanup Automatic cleanup rules To delete obsolete backup versions automatically, you can set one of the following cleanup rules: Delete versions older than [defined period] available for full method only – Select this option to limit the age of backup versions.
All versions that are older than the specified period will be automatically deleted. Delete version chains older than [defined period] available for incremental and differential methods only – Select this option to limit the age of backup version chains. The oldest version chain will be deleted only when the most recent backup version of this chain is older than the specified period.
Store no more than [n] recent versions available for full method only – Select this option to limit the maximum number of backup versions. When the number of versions exceeds the specified value, the oldest backup version will be automatically deleted. Store no more than [n] recent version chains available for incremental and differential methods only – Select this option to limit the maximum number of backup version chains.
When the number of version chains exceeds the specified value, the oldest backup version chain will be automatically deleted. Keep size of the backup no more than [defined size] – Select this option to limit maximum size of the backup. After creating a new backup version, the program checks whether the total backup size exceeds the specified value.
If it’s true, the oldest backup version will be deleted. Products: Acronis True Image 9. Dear Mr Smith, Thank you for your detailed and prompt response. Forum Hero. No, the backup scheme describes how your backup task will perform the backup action. Dear Mr Smith, Thank you very much for your detailed and very useful responses.
Acronis true image 2017 delete backup free download
If the short error message was not enough to find a solution and resolve the issue, search for key words «error» and «failed» in the full log which can be accessed by any of the listed methods:.
If you do not want to troubleshoot, but are OK with repeating the procedure of configuring the backup task and running a full backup again, you can try a clean reinstall and start over with a new backup task. Create a new empty folder in the backup destination for storing the backups local backup or create a new backup task backup to Cloud.
Delete the old backup to make room for the new backup. While that does not help always, it still can save you time and efforts on troubleshooting a number of backup failures, especially undocumented. Backup error message For causes and solutions please see the entire cells to the right. Solutions: apply solutions in the order they are listed. Check if the issue is resolved after each. Cannot access backup file. Please ensure that you entered the correct credentials for the network share.
Your subscription has expired. Please update your subscription to be able to perform the selected operation. Skip to main content.
Last update: To see the short error message do either of the following: Click on the red cross or the pause icon in the center of backup task screen. When launched, it automatically loads and displays a formatted log of the latest backup attempt, where you can find the error message and look it up here. Common backup errors, causes and solutions Backup error message For causes and solutions please see the entire cells to the right.
Possible causes Solutions: apply solutions in the order they are listed. The backup location was not found on the destination drive The device, where backups are physically stored, is powered off, not connected, hung up or does not provide access to the directory with backups due to any other reason Multiple drives are used either for storing backups, or as backup source, within a single backup task.
TIBs in Windows Explorer? Now the old paths to. TIBs, remembered by the program previously, point nowhere and the software is unable to access the files required to continue a backup set. The trial period is restricted to 30 days and to be only one-time per major version of Acronis True Image in the given operating system.
Renewed subscription license was activated to a different email address, leaving the original account without a license. Software entered trial mode, which then ended.
The regular license check failed and the software transitioned into trial mode, which then ended Renewed subscription license or a new perpetual license could not be activated due to any other reason, the software entered trial mode, which then ended System date and time changed as a result of system recovery, clone or any other way Issue with the license cache on the current computer Check the major version of installed Acronis software e.
TIB files Automatic cleanup rules are misconfigured Earlier backup versions were not deleted due to any reason The disk where backups are stored, became filled with not Acronis files NAS: the limit quota for the NAS user account, indicated during backup setup, has been reached.
Acronis has no influence on it. The NAS user account is completely unrelated to Acronis account and is set exclusively through the NAS management panel External drive, where backups are saved, has quotas enabled for different Windows users. TIBs from the destination disk. Earlier backups are deleted by chains. Deletion of any backup version is postponed until all the chain is subject to deletion.
This might happen in scenarios of multiple Acronis products installation, re-installation and uninstallation, because the core Acronis drivers are shared among products. Edit backup task, click on the backup source on the left side of the window and re-select what to back up.
Delete the backup task that fails and create a new one Uninstall Acronis product, reboot the computer and install it again If multiple Acronis products are installed: uninstall all of them, run the Cleanup tool , reboot the computer and install Acronis True Image anew.
If a NAS is involved and there are other machines that have access to the NAS, close such programs on those computers too Close all other software before starting the backup, including data synchronization, copying, backup, cataloging, search and indexing Disable antivirus and other security software anti-malware etc.
Backup source or destination contains NTFS reparse points. Find which folder or folder exactly cannot be accessed. If the operation fails — attempt deleting it. Access to the file is denied Failed to enumerate directory 0x The media is write protected The file is read-only Error occurred while reading the file Cannot access backup file.
Faulty disks need to be replaced with new to avoid data loss: Free CrystalDiskInfo instantly reads the disk health status as reported by the disk itself and displays it as Good, Caution or Bad. It is the quickest way to identify a disk hardware failure. If it succeeds, or if you need space for new backup, delete the original backup FES request failed SSL connection has failed Failed to renew certificate, reason is “certificate expired” Bad certificate request The server rejected the renewed certificate The remote server returned error Failed to lock the file Read error or data content is corrupted Local backups: possible issue with the connection to the backup storage device or an issue with the storage device itself Local backups: backup archive file was created incorrectly needs to be recreated Local and Cloud backups: the main body part of the backup could have been written incorrectly from the beginning, or there was an unsuccessful attempt to update the backup afterwards.
The backup is damaged at present and is not readable. Either the stream is corrupted or the archive options are incorrect. Then sign in back using the current credentials. Unable to initialize snapshot manager library The activity has failed due to a restart of the service Your subscription has expired.
Owners of one-time purchase licenses: perpetual license was not activated Subscription license owners: subscription has expired and requires renewal Subscription license owners: you may be asked whether you want to add more Cloud storage space or extend the duration of the subscription with the current Cloud storage quota If you used different email addresses in Acronis program check Account tab and when purchasing new or renewing existing license check emails from Acronis and online stores , please move the new license to the account that is displayed under Account tab.
Backup failed Operation failed Read error Write error Error occurred while writing the file Canceled. Was this article helpful?
The backup location was not found on the destination drive. The device, where backups are physically stored, is powered off, not connected, hung up or does not provide access to the directory with backups due to any other reason Multiple drives are used either for storing backups, or as backup source, within a single backup task.
This is not the last volume of the backup archive. Reconnect external disk: Safe eject the drive If it has an external power source — disconnect it, wait 10 seconds, and re-connect it Re-connect the disk to a different port on the computer NAS devices: reboot the NAS Reboot the computer. The trial version of Acronis True Image has expired. Trial mode was already used once. The regular license check failed and the software transitioned into trial mode, which then ended Renewed subscription license or a new perpetual license could not be activated due to any other reason, the software entered trial mode, which then ended System date and time changed as a result of system recovery, clone or any other way Issue with the license cache on the current computer.
Check the major version of installed Acronis software e. Running out of space on the disk where backups are stored: Automatic backup cleanup does not apply to backup versions that are not visible in Acronis True Image interface.
Check that other software is not filling the disk space where you save the backups. Backup versions occupy too much disk space in the Cloud. Cannot find the files or folders selected for the backup. Cannot find the partition selected for the backup. NAS is turned off, disconnected or stopped serving file shares Issue with the DNS service on the router DNS name or IP-address of the NAS has changed Router stopped working properly, causing issues with local network Backup source, destination or both computers are configured to turn off their network adapters to save power.
Verify that the NAS is turned on and is accessible through Windows Explorer: try copying a file from backup source to the backup destination using Windows Explorer. A particular file or folder in the backup source is corrupted and cannot be accessed and opened by any software, not only Acronis Issue with the file system. Bad blocks or other errors on the source disk Any other issue with the hardware Damaged file system.
Connection to Acronis servers is interrupted or completely blocked by a firewall, hosts file settings or a third-party software The software was unable to update the certificate file that is used as a key in establishing secure connection to Acronis servers due to any reason Issue with a particular backup that was damaged and needs to be recreated. If it succeeds, or if you need space for new backup, delete the original backup.
Failed to renew certificate, reason is “certificate expired”. Local backups: possible issue with the connection to the backup storage device or an issue with the storage device itself Local backups: backup archive file was created incorrectly needs to be recreated Local and Cloud backups: the main body part of the backup could have been written incorrectly from the beginning, or there was an unsuccessful attempt to update the backup afterwards.
Such backup is also called “corrupted”. Error while checking the metadata integrity of points in time PITs in the archive. Invalid internal API usage.
Read error or metadata content is corrupted. Wrong email or password for Acronis account Have you changed your Acronis account password? Acronis account email or password were changed, but not updated in the program. The activity has failed due to a restart of the service. Owners of one-time purchase licenses: perpetual license was not activated Subscription license owners: subscription has expired and requires renewal Subscription license owners: you may be asked whether you want to add more Cloud storage space or extend the duration of the subscription with the current Cloud storage quota.
If you used different email addresses in Acronis program check Account tab and when purchasing new or renewing existing license check emails from Acronis and online stores , please move the new license to the account that is displayed under Account tab. It is used by backup software to keep the data in a consistent state in the backup Issue with VSS infrastructure, including VSS readers, writers, providers of third-party applications, installed on the computer No free space on the source disk Too high disk activity on the source disk Permissions issue with system partitions, files, folders or in the system registry.
A generic error message is shown.
Acronis true image 2017 delete backup free download.Acronis True Image 2017 20.0 Build 5554 Bootable ISO
GH, welcome to these public User Forums. I selected the backup and right clicked on “version cleaning” or similar: translated from Italian. Order Asc Desc.
