Acronis true image 2017 bedienungsanleitung pdf free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User Manual: acronis True Image (PC) – Instruction Manual Free User Guide for Acronis True Image Software, Manual. If you want first to try and evaluate Acronis True Image , you can install the free, day trial version of the product. After the trial period. Supported QNAP Code Signing for QTS Acronis TrueImage (/11/07).
 
 

Acronis True Image

 
If you want first to try and evaluate Acronis True Image , you can install the free, day trial version of the product. The trial version is fully. If you want first to try and evaluate Acronis True Image , you can install the free, day trial version of the product. After the trial period.

Acronis True Image Clone to SSD – How to Guides

All the operations are based on intuitive interface, so users can understand it easily and use it as a professional. Note the clone feature in this free trial version can only be demonstrated, to clone HDD and SSD and boot from it, please upgrade pro trial version. Because the disk cloning process will overwrite the target drive.

Select Clone from the left pane and then click Disk Clone. Select the drive that you wish to clone here is Disk 0. Step 3. Select the SSD as the destination drive Disk 2. Here you can see an Operation Summary of disk info.

Also, you can use Sector by sector clone to keep the old partition layout or Edit Partitions to adjust the partition size on the destination disk. And the later one is more practical, since it resolves two potential issues during the cloning process. By default, all the cloning software makes an exact copy of source disk unless you change the partition size while cloning.

To prevent this from the beginning, try the following 3 options in Edit partitions. One of the biggest reason is the destination and source disk has different partition style and you don’t convert them to the same before cloning.

In this situation, you can simply check Convert the destination disk from MBR to GPT or vice versa, depending on the disk partition styles of them. And you can check its disk properties in Disk Management. The overall steps are below:. You can keep it as a backup or reformat the hard drive for other purposes. To confirm if the cloned SSD is bootable, please directly boot from it. Refer to Step 2 Creating Acronis bootable media p.

On the Welcome screen, select My disks below Recover. Select the system disk backup to be used for recovery. Right-click the backup and choose Recover. When the backup is not displayed, click Browse and manually specify the path to the backup.

In the same window, you can connect to Acronis Cloud and select an online backup. At the Recovery method step, select Recover whole disks and partitions. Select the system partition usually C on the What to recover screen. Note that you may distinguish the system partition by the Pri, Act flags. Select the System Reserved partition if any , as well.

You may leave all settings of the partitions without changes and click Finish. Check the summary of operations, and then click Proceed. When the operation finishes, exit the standalone version of Acronis True Image , remove the bootable media if any , and boot from the recovered system partition.

After making sure that you have recovered Windows to the state you need, restore the original boot order. How to create an Acronis account If you do not have an Acronis account yet, perform the following steps: 1. On the sidebar, click Account, and then click Sign in or create an account. Click Create account. Fill in the registration form. Provide the required data, accept the Terms of Use, and, optionally, subscribe to receive news and promotional offers occasionally.

To keep your personal data secure, choose a strong password for your online backups, guard it from getting into the wrong hands, and change it from time to time. An email message will be sent to the address you specified. Open this message and confirm your wish to create an account. How to sign in To sign in to your Acronis account: 1. Enter your registration email address and password, and then click Sign in.

How to sign out To sign out of your Acronis account: 1. Click your email address, and then choose Sign out. In the case of a disaster or data corruption, you can recover your files and even the entire contents of your computer.

With one account, you can save data from several computers and all your mobile devices running iOS and Android operating systems. To start using Acronis Cloud, you need a subscription to the service. Refer to Subscription information p. Web application On the other hand, Acronis Cloud is a web application that allows you to recover and manage the data you store on Acronis Cloud. To work with the application, you can use any computer connected to the Internet.

You may be especially concerned about your mobile device, because all of your data will be transferred through the Internet. Let us assure you that your data will be safe. To access the data, sign in to your account by providing the email address and password for that account. Second, you can choose to use only protected Wi-Fi networks for backing up of your data. In this case, your data will be completely safe while it is transferred to Acronis Cloud.

Select the secure Wi-Fi networks for backup p. To subscribe, start Acronis True Image , go to the Account tab, and then choose if you want to start a trial subscription or buy a full one. See details in Trial version information p. Full version You can purchase the full Acronis Cloud subscription in the Account section of your version of Acronis True Image or at the Acronis website.

Backup and recovery Backup refers to the making copies of data so that these additional copies may be used to recover the original after a data loss event. Refer to Protecting your system p. Acronis True Image does both by creating disk or partition images and file-level backups respectively. When the original location is selected, the data in the location is completely overwritten with the data from the backup.

In case of a new location, the data is just copied to the new location from the backup. Before the recovery starts, the files in the original location are compared with the files in the backup by file attributes, such as file size and date of last modification. Those files that do not match are marked for recovery, the remaining files will be skipped during recovery. In that way, as opposed to the full recovery, Acronis True Image recovers only changed files.

This method significantly reduces the recovery time and saves Internet traffic while recovering from Acronis Cloud. Backup versions Backup versions are the file or files created during each backup operation. The number of versions created is equal to the number of times the backup is executed. So, a version represents a point in time to which the system or data can be restored.

The backup versions are similar to file versions. The file versions concept is familiar to those who use a Windows feature called “Previous versions of files”. This feature allows you to restore a file as it existed on a particular date and time.

A backup version allows you to recover your data in a similar way. Disk cloning This operation copies the entire contents of one disk drive to another disk drive. This may be necessary, for example, when you want to clone your operating system, applications, and data to a new larger capacity disk. Backup file format Acronis True Image usually saves backup data in the proprietary tib format using compression. The data from. Acronis Nonstop Backup uses a special hidden storage for data and metadata.

The backed up data is compressed and split into files of about 1 GB. These files also have a proprietary format and the data they contain can be recovered only with the help of Acronis True Image. Backup validation The backup validation feature allows you to confirm that your data can be recovered. The program adds checksum values to the data blocks being backed up. During backup validation, Acronis True Image opens the backup file, recalculates the checksum values and compares those values with the stored ones.

If all compared values match, the backup file is not corrupted. Scheduling For your backups to be really helpful, they must be as “up-to-date” as possible. Schedule your backups to run automatically and on a regular basis.

Deleting backups When you want to delete backups and backup versions you no longer need, please do it by using the tools provided by Acronis True Image Refer to Deleting backups and backup versions p. Acronis True Image stores information on the backups in a metadata information database. Therefore, deleting unneeded backup files in File Explorer will not delete information about these backups from the database.

This will result in errors when the program tries to perform operations on the backups that no longer exist. Acronis True Image stores an exact snapshot of the disk or partition. One or more partitions, including: 1. Boot code. File system meta data, including service files, file allocation table FAT , and partition boot record.

File system data, including operating system system files, registry, drivers , user data and software applications. System Reserved partition, if any. What is excluded from disk backups? To reduce image size and speed up image creation, by default Acronis True Image only stores the hard disk sectors that contain data. In this case, Acronis True Image copies all hard disk sectors, and not only those that contain data.

Full method The result of a full method backup operation also known as full backup version contains all of the data at the moment of the backup creation. Example: Every day, you write one page of your document and back it up using the full method. Acronis True Image saves the entire document every time you run backup.

Additional information A full backup version forms a base for further incremental or differential backups. It can also be used as a standalone backup. A standalone full backup might be an optimal solution if you often roll back the system to its initial state or if you do not like to manage multiple backup versions.

Recovery: In the example above, to recover the entire work from the 4. Example: Every day, you write one page of your document and back it up using the incremental method. Acronis True Image saves the new page every time you run backup. Note: The first backup version you create always uses full method.

Additional information Incremental method is the most useful when you need frequent backup versions and the ability to roll back to a specific point in time. As a rule, incremental backup versions are considerably smaller than full or differential versions.

On the other hand, incremental versions require more work for the program to provide recovery. Therefore, if you lose an incremental backup version or it becomes corrupted, all later incremental versions are unusable.

Example: Every day, you write one page of your document and back it up using the differential method. Acronis True Image saves the entire document except the first page stored in the full backup version. Additional information Differential method is an intermediate between the first two approaches.

It takes less time and space than “Full”, but more than “Incremental”. To recover data from a differential backup version, Acronis True Image needs only the differential version and the last full version.

Therefore, recovery from a differential version is simpler and more reliable than recovery from an incremental one. To choose a desired backup method, you usually need to configure a custom backup scheme. For more information see Custom schemes p. An incremental or differential backup created after a disk is defragmented might be considerably larger than usual. This is because the defragmentation program changes file locations on the disk and the backups reflect these changes.

Therefore, it is recommended that you re-create a full backup after disk defragmentation. Changes to the disk content are continuously tracked at the block level. When a backup starts, the changes can be immediately saved to the backup. For more information, refer to Supported storage media. The table below shows possible backup destinations for your data. Recommended storage media: 1. Acronis Cloud 2.

External drive If you plan to use an external USB hard drive with your desktop PC, we recommend that you connect the drive to a rear connector by using a short cable. The write key allows you to use an NDAS-enabled device in write mode for example, for saving your backups. Usually the device ID and write key are printed on a sticker attached to the bottom of the NDAS device or on the inside of its enclosure. If there is no sticker, you need to contact your NDAS device vendor to obtain that information.

Network share See also: Authentication settings p. Due to the necessity of swapping discs, we strongly recommend to avoid backing up to DVDs if the number of discs is more than three. When there is no alternative to backing up to DVDs, we recommend to copy all DVDs to a folder on a hard disk, and then to recover from that folder. If this is the case, use the operating system tools to change the disk status to Online and then to initialize the disk.

To change a disk status to Online:. Open Disk Management. Find the disk marked as Offline. Right-click the disk and then click Online. The disk status will be changed to Online. After that, you will be able to initialize the disk.

To initialize a disk: 1. Find the disk marked as Not Initialized. Right-click the disk and then click Initialize Disk. To create one more volume, repeat this operation.

The computer will try to connect to the specified FTP server. If the test connection has been established, click the Connect button to add the FTP connection. The created FTP connection will appear in the folder tree. Select the connection and browse for the backup storage that you want to use. Please, be aware that the mere opening of an FTP server’s root folder does not bring you to your home directory.

For data to be recovered directly from an FTP server, the backup must consist of files no greater than 2GB each. If you back up to a hard disk with the aim of transferring the backup to an FTP later, you may split the backup into files of 2GB each by setting the desired file size in the backup options.

An FTP server must allow passive mode file transfers. For example, this is possible when you select a backup storage. The Authentication Settings window appears automatically when you select a networked computer name. When the test is successfully passed, click Connect.

Otherwise, you will not be able to connect to the shared folder. It allows you to recover entire disks, individual files and their different versions. The main purpose of Acronis Nonstop Backup is continuous protection of your data files, folders, contacts, etc. If you choose to protect an entire partition, you will be able to recover the partition as a whole using the image recovery procedure.

We do not recommend using nonstop backup as a primary way to protect your system. Refer to Examples of custom schemes p. How it works Once you start Acronis Nonstop Backup, the program will perform an initial full backup of the data selected for protection. Acronis Nonstop Backup will then continually monitor the protected files including open ones.

Once a modification is detected, the changed data is backed up. The shortest interval between the incremental backup operations is five minutes. This allows you to recover your system to an exact point in time. Acronis Nonstop Backup checks file changes on the disk, not in the memory. If, for instance, you are working in Word and do not use the “Save” operation for a long time, your current changes in the Word document will not be backed up.

You may think that at these backup rates the storage will fill in no time. Do not worry as Acronis True Image will back up only so called “deltas”. This means that only differences between old and new versions will be backed up and not whole changed files. For example, if you use Microsoft Outlook or Windows Mail, your pst file may be very large. Furthermore, it changes with each received or sent E-mail message.

Backing up the entire pst file after each change would be an. Retention rules Local backups Acronis Nonstop Backup keeps all backups for the last 24 hours.

The older backups will be consolidated in such a way that Nonstop Backup will keep daily backups for the last 30 days and weekly backups until all Nonstop Backup data destination space is used. The consolidation will be performed every day between midnight and AM. The first consolidation will take place after the Nonstop Backup has been working for at least 24 hours.

In this case the first consolidation will be performed between and AM on July Then the program will consolidate the data every day at the same time. If your computer is turned off between and AM, the consolidation will start when you turn the computer on.

If you turn off Nonstop Backup for some time, the consolidation will start after you turn it on again. The retention rules are pre-set and cannot be changed. In many cases an external hard disk will be the best choice for Nonstop Backup data storage. It does not matter whether an NAS share you want to use for the storage is mapped as a local disk or not. If the share requires login, you will need to provide the correct user name and password.

For more information see Authentication settings p. Acronis True Image remembers the credentials and the subsequent connections to the share do not require login. When an external hard disk or NAS is unavailable, the Nonstop Backup destination can be an internal disk, including a dynamic one.

Please note that you cannot use a partition to be protected as a Nonstop Backup storage. If your computer has a single hard disk drive with a single partition, but you want to use Acronis Nonstop Backup anyway, you can create Acronis Secure Zone and use it as the Nonstop Backup data storage. Before creating Acronis Nonstop Backup data storage, Acronis True Image checks whether the selected destination has enough free space.

It multiplies the volume of data to be protected by 1. If the free space on the destination. When the system load rises to a critical level, Acronis Nonstop Backup receives the overload alarm from Windows and pauses itself. This is done to aid Windows relieve the load caused by other applications. The overload can be caused by running resource-intensive applications for example, performing a deep system scan with your antivirus software.

In such a case Nonstop Backup automatically pauses and you cannot restart it. After pausing, Acronis Nonstop Backup gives the system one hour to relieve the load and then attempts to restart. The automatic restart count for Acronis Nonstop Backup is 6. This means that after the first automatic restart Acronis Nonstop Backup will attempt to restart five more times with intervals of exactly one hour between attempts.

After the sixth unsuccessful attempt, Acronis Nonstop Backup will wait for the next calendar day. On the next day the automatic restart count will automatically reset. When not interfered with, Acronis Nonstop Backup performs six restart attempts per day. Restarting Acronis Nonstop Backup service will only reset the restart count to 0. If the system is still overloaded, Acronis Nonstop Backup will pause again.

Rebooting the computer will reset the load and the restart count. If the system overloads again, Acronis Nonstop Backup will pause. Yes, the manual of the Acronis True Image is available in English.

No results. Acronis True Image manual pages. Acronis True Image Home manual pages. Acronis True Image Unlimited manual pages. Acronis Disk Director 11 Home manual 97 pages. Backup Software.

Acronis true image 2017 bedienungsanleitung pdf free

Сьюзан не могла не восхититься умом Танкадо. Не открыв своего алгоритма, он доказал АНБ, что тот не поддается дешифровке. Стратмор протянул Сьюзан газетную вырезку. Это был перевод рекламного сообщения «Никкей симбун», японского аналога «Уолл-стрит джорнал», о том, что японский программист Энсей Танкадо открыл математическую формулу, с помощью которой можно создавать не поддающиеся взлому шифры.